Skip to content

Science & methods

This page lists exactly what exohab computes, where each formula comes from, how the results were checked and what they do not mean.

Earth Similarity Index (four parameters)

Schulze-Makuch et al. (2011) define, for each planetary property \(x\) with Earth reference value \(x_0\) and weight exponent \(w\):

\[ \mathrm{ESI}_x = \left(1 - \left|\frac{x - x_0}{x + x_0}\right|\right)^{w} \]

The four properties are combined as geometric means:

\[ \mathrm{ESI}_I = \sqrt{\mathrm{ESI}_R\,\mathrm{ESI}_\rho}, \qquad \mathrm{ESI}_S = \sqrt{\mathrm{ESI}_{v_e}\,\mathrm{ESI}_{T_s}}, \qquad \mathrm{ESI} = \sqrt{\mathrm{ESI}_I\,\mathrm{ESI}_S} \]

This is algebraically identical to the Planetary Habitability Laboratory form \(\prod_i (1 - |\ldots|)^{w_i/n}\) with \(n = 4\).

Property Earth reference Weight \(w\)
Mean radius \(R\) 1 EU (6371 km) 0.57
Bulk density \(\rho\) 1 EU (5.51 g cm⁻³) 1.07
Escape velocity \(v_e\) 1 EU (11.19 km s⁻¹) 0.70
Mean surface temperature \(T_s\) 288 K 5.58

Earth Similarity Index (two parameters)

For planets with only a radius \(R\) and a stellar flux \(S\) (Earth units), the Planetary Habitability Laboratory uses:

\[ \mathrm{ESI} = 1 - \sqrt{\tfrac{1}{2}\left[\left(\frac{S - 1}{S + 1}\right)^2 + \left(\frac{R - 1}{R + 1}\right)^2\right]} \]

This is not numerically identical to the four-parameter ESI.

Similarity to other bodies

compute_similarity applies the four-parameter formula with another body's reference values. The Mars preset is the Mars Similarity Index of Kashyap Jagadeesh et al. (2017), with its own published reference values (3390 km, 3.93 g cm⁻³, 5.03 km s⁻¹, 240 K) and weights (0.86, 2.10, 1.09, 3.23). Venus and Titan use NASA fact-sheet values with the Earth ESI weights, because no body-specific weights have been published.

Surface temperature

Catalogues list equilibrium temperature \(T_\mathrm{eq}\), not surface temperature. Kashyap Jagadeesh (2017, eq. 3.12) fitted the following relation to Earth, Mars, the Moon, Titan and Triton (Venus was excluded):

\[ T_s = 9.650 + 1.096\,T_\mathrm{eq} \]

It only applies to rocky planets with an atmosphere, rests on five bodies, and is an extrapolation above about 255 K. exohab uses it only when you ask for surface_temp_method="kashyap2017".

Habitable zone

Kopparapu et al. (2014) give each boundary as a polynomial in \(T_\star = T_\mathrm{eff} - 5780\,\mathrm{K}\):

\[ S_\mathrm{eff} = S_{\mathrm{eff},\odot} + a T_\star + b T_\star^2 + c T_\star^3 + d T_\star^4, \qquad d = \sqrt{L / S_\mathrm{eff}}\ \mathrm{AU} \]

The coefficients are copied exactly from the authors' published calculator for 1 Earth-mass planets, plus the 5 and 0.1 Earth-mass runaway-greenhouse limits. The fits are valid for 2600–7200 K.

PHI and BCI

\[ \mathrm{PHI} = (S \cdot E \cdot C \cdot L)^{1/4} \quad \text{(Schulze-Makuch et al. 2011)}, \qquad \mathrm{BCI} = (S \cdot E \cdot T \cdot G \cdot A)^{1/5} \quad \text{(Irwin et al. 2014)} \]

The factor scores in [0, 1] come from expert rubrics in those papers. exohab implements only how the scores are combined.

Uncertainty

A quote \(x^{+a}_{-b}\) is sampled from the two-piece normal distribution: a normal with width \(b\) below the quoted value and \(a\) above it. A draw falls below the quoted value with probability \(b/(a+b)\), and the mean is \(x + \sqrt{2/\pi}\,(a - b)\) (Wallis 2014). Inputs are sampled independently, except that density and escape velocity are derived from the same mass and radius in each draw when mass is given.

Validation

The automated test suite checks exohab against these published values, among others:

Check Published exohab
Mars, four-parameter ESI (interior / surface / global) 0.82 / 0.65 / 0.73 (Kashyap Jagadeesh 2017) 0.815 / 0.649 / 0.727
Proxima b, two-parameter ESI 0.8692 (arXiv:1712.01040) 0.8692
Earth on the Mars Similarity Index 0.68 (Kashyap Jagadeesh 2017) 0.683
Kepler-442 b, four-parameter ESI 0.94 / 0.84 / 0.89 (Kashyap Jagadeesh 2017) within rounding
Habitable-zone flux at 5780 K 1.107 and 0.356 (Kopparapu et al. 2014) exact
Earth's surface temperature from \(T_\mathrm{eq}\) = 255 K 289.28 K (Kashyap Jagadeesh 2017) 289.13 K (rounded coefficients)

Limitations

  • ESI measures similarity, not the probability of life. A high ESI means Earth-like bulk properties and insolation, nothing more.
  • Equilibrium vs. surface temperature. By default pl_eqt is used directly as the temperature input, which lowers the surface ESI of temperate planets.
  • Mass. The archive's pl_bmasse may be a minimum mass (M sin i) for radial-velocity planets.
  • Missing error bars are treated as zero and flagged; those intervals are lower limits.
  • Habitable-zone limits are NaN outside 2600–7200 K unless extrapolation is requested explicitly.

References

  • Schulze-Makuch, D. et al. (2011). A Two-Tiered Approach to Assessing the Habitability of Exoplanets. Astrobiology 11(10), 1041–1052. doi:10.1089/ast.2010.0592
  • Planetary Habitability Laboratory, UPR Arecibo. Earth Similarity Index. https://phl.upr.edu/projects/earth-similarity-index-esi
  • Kashyap Jagadeesh, M. (2017). Earth Similarity Index and Habitability Studies of Exoplanets. M.Phil. dissertation, Christ University. arXiv:1801.07101
  • Irwin, L. N., Méndez, A., Fairén, A. G., Schulze-Makuch, D. (2014). Assessing the Possibility of Biological Complexity on Other Worlds. Challenges 5(1), 159–174. doi:10.3390/challe5010159
  • Kopparapu, R. K. et al. (2013). Habitable Zones around Main-sequence Stars: New Estimates. ApJ 765, 131. arXiv:1301.6674
  • Kopparapu, R. K. et al. (2014). Habitable Zones around Main-sequence Stars: Dependence on Planetary Mass. ApJL 787, L29. arXiv:1404.5292
  • Wallis, K. F. (2014). The Two-Piece Normal, Binormal, or Double Gaussian Distribution. Statistical Science 29(1), 106–112.